MILESEEY GenePro G1 Touchscreen & GPS Rangefinder

Ball-to-Pin™ mode is a proprietary technology based on MILESEEY's leading Point-to-Point Measure, it allows you to measure between any two points on the course from any location, reducing the hassles of going back and forth.

For example, when your cart can't go further to the fairway, Ball-to-Pin™ mode lets you measure the distance from the ball to the pin from the cart path so you can pick the right club in advance, or when there are obstacles between you and the target, it can also help you measure over the obstacles and get the distance to the target.

Just shoot the ball to get the first measurement and then shoot the target to get the second, and G1 will automatically calculate the distance between the two and display it on the screen.

It shows the correct direction to the green center with GPS distance reading even when your line of sight to the green is hindered, eliminating blind shots. This feature is really helpful when you play on unfamiliar courses, helping you gain the edge back.

They are dynamic GPS distance readings to the Front, Center and Back of the green.

Yes. The AMOLED touchscreen ensures high readability even in bright sunlight conditions. Enable the Rain & Fog mode to maintain laser accuracy and consistency when bad weather surprises your play.

Apart from standard single measurement mode, GenePro G1 also offers Flag-Lock mode (scanning) and Ball-to-Pin™ mode with an additional Rain & Fog settings.

Yes — golfers can easily toggle the slope function on/off with the external rotating switch to stay tournament-legal.

Apart from angles, SmartSlope™ factors in environmental elements, such as temperature, humidity and elevation to the slope algorithm to provide golfers the most accurate compensated distances on course, because sometimes in golf even an inch can be the difference between a hole-in-one and an epic fail. Rotate the external slope switch to OFF for tournament plays.

To help ensure a consistent and accurate distance measurement, please note the following:

• Mist, rain, and fog affect ranging ability — enable Rain & Fog mode.
• Shiny, reflective surfaces reflect better than dull, textured ones.
• Ranging under cloud cover can improve performance compared to bright sun.
• Flat surfaces perpendicular to the laser beam reflect better than angled ones.
• At longer distances, larger objects are easier to range than smaller ones.

If your rangefinder has condensation in the lens, put it in uncooked rice overnight to soak up the moisture. This should help remove condensation. If this does not help, please contact our customer support team for assistance.

Although GenePro G1 supports using with gloves on, for optimal responsiveness, use with bare fingers is highly recommended.

Your GenePro G1 might be set to the wrong unit of measurement. Toggle between yards/meters in Settings. Weather (fog/rain) may also affect accuracy — enable Rain & Fog mode. If still inaccurate, contact our customer support team.

Ensure you completed a laser read on the current hole map, then wait for the coverage arc to render. If you switched holes, re-enter the correct hole page first.

Make sure you have selected the right tee box and hole. If a recent course change isn’t reflected, perform a course update via the app and re-sync.

You can download the latest User Manual and Quick Start PDFs for G1 here.

Follow the step-by-step guide on the G1 Support page. Map updates are free; ensure the device has sufficient power during updates.

GenePro G1 uses a high-capacity Li-ion battery with battery life up to 24 hours. Actual battery life may vary depending on usage.

Yes. It can be charged using any standard USB port or AC adapter. Heat during charging is normal.

Yes, GenePro G1 is IP65 protected. That means it’s dust-tight and resistant to low-pressure water jets from any direction — suitable for wet environments but not submersion.

No. Strong magnetic fields could interfere with functions. Instead, a magnetic carrying case (sold separately) is available.

Go to Settings → Compass Calibration and follow on-screen instructions. Perform this outdoors on a real course and away from strong magnetic fields.

• Blow away dust or debris first.
• Use the included cleaning cloth for dirt/fingerprints.
• For thorough cleaning, use photographic lens tissue with cleaning fluid (apply fluid to cloth, not directly).
• Device is water resistant but not waterproof — avoid heavy rain or submersion.

We’ve made returns and warranty claims simple. Submit your request through our Contact Us page or email mileseeygolf@mileseey.com. Our support team will take care of you from there.